J Pass wire harness on the inside
of vehicle from rear fender rib.
K Pass wire harness under starter
relay.
L Pass starter motor lead under
branched harness and put it up-
ward.
M Fit fuel sender coupler onto
cross pipe on frame.
N Using clamp, fix wire harness to
cross pipe on frame. Locate
clamp tip forward of vehicle.
CABLE ROUTING
O Pass fuel pump lead between
ignition coil and filter, and push it
downward.
P Using clamp, fix wire harness to
the stay.
Q Pass under #2 and #4 spark plug
leads for layout.
R Using clamp, fix clutch cable and
starter cable.
–19–
SPEC
S Using clamp, fix #2 and #4 spark
plug leads.
T Fit clamp fastened to wire har-
ness onto T-stud on frame.
U Pass wire harenss through cut in
box rear and connect it inside
box.
V Using clamp, fix wire harness to
bracket (at 2 positions)