Table of Contents
Advertisement
2
1
2
1
3
1
2
–30–
CLUTCH
EB405701
INSTALLING THE CLUTCH
1. Install:
S bearing 1
S spacer 2
NOTE:
Install the spacer with the two screw holes
facing towards the clutch boss.
2. Tighten:
S clutch boss nut 1
NOTE:
While holding the clutch boss with the univer-
sal clutch holder 2 , tighten the clutch boss
nut.
Universal clutch holder
90890-04086
3. Bend the lock washer 3 tab along a flat side
of the nut.
4. Lubricate:
S long clutch push rod 1
S ball 2
S short clutch push rod 3
S O-ring 4
(with the recommended lubricant)
Recommended lubricant
Lithium soap base grease
5. Install:
S long clutch push rod
S ball
S short clutch push rod
(along with a new O-ring 4 )
6. Lubricate:
S friction plates 1
S clutch plates 2
(with the recommended lubricant)
Recommended lubricant
Engine oil
ENG
70 Nm (7.0 mSkg)
Hide quick links:
Advertisement
Table of Contents
