Chassis; Adjusting The Front Brake; Electrical System - Yamaha FZS600 2002 Supplementary Service Manual

ADJUSTING THE FRONT BRAKE/

REPLACING THE HEADLIGHT BULBS
–25–
EB304001

CHASSIS

ADJUSTING THE FRONT BRAKE
1. Adjust:
S brake lever position
(distance a from the throttle grip to the
brake lever)
a. While pushing the brake lever forward,
turn the adjusting dial 1 until the brake le-
ver is in the desired position.
NOTE:
Be sure to align the setting on the adjusting
dial with the arrow mark 2
Position #1
Position #5
WARNING
After adjusting the brake lever position,
make sure that the pin on the brake lever
holder is firmly inserted in the hole in the
adjusting dial.

ELECTRICAL SYSTEM

EB305051
REPLACING THE HEADLIGHT BULBS
The following procedure applies to both of the
headlight bulbs.
1. Disconnect:
S headlight lead 1
2. Remove:
S headlight bulb holder 1
3. Remove:
S headlight bulb 2
WARNING
Since the headlight bulb gets extremely
hot, keep flammable products and your
hands away from the bulb until it has
cooled down.
CHK
ADJ
Distance is the
a
largest.
a
Distance is the
smallest.