1 "SELECT" button
2 "RESET" button
3 Clock
INSTRUMENT FUNCTION
ELECTRICAL SYSTEM
INSTRUMENT FUNCTION
Digital clock
To set the clock:
1. Push both the "SELECT" 1 and "RESET" 2
2. When the hour digits start flashing, push the
3. Push the "SELECT" button 1 to change the
4. When the minute digits start flashing, push
5. Push the "SELECT" button 1 to start the
–48–
buttons for at least two seconds.
"RESET" button 2 to set the hours.
minutes.
the "RESET" button 2 to set the minutes.
clock.
NOTE:
After setting the clock, be sure to push the
"SELECT" button 1 before turning the main
switch to "OFF", otherwise the clock will not
be set.
ELEC