Drying; Storage; What Should I Do If - Pari SOLE N Instructions For Use Manual

4.3 Drying

• You can remove excess water more quickly by shaking all parts.
• Place the nebuliser parts on a dry, clean and absorbent surface and let them dry com-
pletely.
• When drying, between applications, and in particular during long breaks, wrap the
nebuliser in a clean, lint-free cloth (e.g. a tea-towel) and keep in a dry, dust-free envi-
ronment.

4.4 Storage

• Disconnect the power cord from the power adapter.
• Wind up the power cord.
The power cord can ...
NOTICE
The power cord can be damaged if it is kinked. Therefore, do not wind the power cord
around the power adapter.
Store the PARI SOLE N, accessories and the accompanying gasket set out of continu-
ous direct sunlight.
Always disconnect the PARI SOLE N from the mains for storage because electrical
devices that remain plugged in present a potential hazard source.

4.5 What should I do if ...

... the nozzle is clogged?
• If the nozzle is clogged and no aerosol can escape, unc-
log the nozzle hole (as illustrated) by gently inserting the
nozzle cleaner (7) from above.
NOTE:
There is a risk of damaging the tubing when using the noz-
zle cleaner. Please take care not to perforate the tubing or
destroy the small nozzle hole. If blockage occurs repeat-
edly, replace the nozzle funnel. Only use an original PARI
nozzle cleaner.
- 44 -