Connect The Electrical - Electric Mirror Aria Installation Manual

Lighted Mirrors
Installation Guide
Installation Guide

6. CONNECT THE ELECTRICAL

A. Prepare the luminaire connectors.
The lighted mirror uses a luminaire connector for connecting the power coming from the wall to the wiring in the
chassis. To prepare the connectors, follow these steps:
i. The two halves of the luminaire connector (yellow or orange plastic) will come connected and attached
to the power cord in the mirror chassis. Separate the two halves by removing the unwired half. It will be
used to connect to wiring coming from the wall.
ii. Take the Ground (green) wire and strip the wire 0.375". Connect the ground wire by inserting it into the
ground connector on the chassis.
iii. Strip the hot (black) and neutral (white) wires in the same way as the ground. Insert the hot and neutral
wires into the free half of the luminaire connector. The connectors are a push-wire style; you will not
require any tooling to insert the wires.
iv. Connect the luminaire ends together.
v. If your mirror does not have optional technology upgrades, turn the power on at the breaker box and
test the functionality of the lights prior to hanging the mirror.
ELECTRIC MIRROR®
425.776.4946
| |
electricmirror.com sales@electricmirror.com
ELECTRIC MIRROR®
ELECTRIC MIRROR®
Strip the wires and bring them
through the small hole in the chassis.
Connect the black and white wires to
the yellow luminaire connector. Black
to black, white to white.
Connect the green ground wire to the
green ground connector.
|
© 2019 Electric Mirror. All rights reserved.
|
2.0419.MC 6