Table of Contents
Advertisement
Lighted Mirrors
Installation Guide
Installation Guide
4. PREPARE THE ELECTRICAL
A. Follow safety precautions.
Turn power off to the circuit via the breaker box powering this mirror. Follow all NEC (National Electric Code)
wiring standards for installation.
B. Determine the location where the electrical wiring should come through the wall.
The electrical entry location is the center point from left to right of the mirror chassis. Generally, the wiring
needs to come out of the wall roughly 14 inches from where the top of the mirror glass will be located. For
specific information visit www.electricmirror.com/product-specifications.
C. Bring electrical power to the mirror location.
The lighted mirror requires a switched 120V 60Hz circuit. If your mirror has additional options, there may be
additional power requirements. When bringing out the wiring, leave a 3-foot whip*.
ELECTRIC MIRROR®
425.776.4946
*Ensure a 3' long electrical whip is available coming out of the wall.
|
|
electricmirror.com
sales@electricmirror.com
ELECTRIC MIRROR®
ELECTRIC MIRROR®
|
© 2019 Electric Mirror. All rights reserved.
|
2.0419.MC
4
Hide quick links:
Advertisement
Table of Contents
