Hang The Mirror - Electric Mirror Aria Installation Manual

Lighted Mirrors
Installation Guide
Installation Guide
9.

HANG THE MIRROR

A. Understand the hanging system.
Hanging the mirror involves three components:
• A hanger located on the back of the mirror
• A hanger receiver located on the chassis
• Anchoring magnets located on the bottom of the mirror
The weight of the mirror is supported at the top of the chassis. The magnets at the bottom anchor the mirror to
the chassis and are required to keep the mirror firmly in place.
Hanger on
mirror back
Magnets on mirror back
B. Align the mirror with the chassis.
Remove only the top protectors, then carefully lift the mirror and angle the top edge slightly towards the chassis
to align the hanger with the hanger receiver. If you're installing a closed-chassis mirror (one in which the LEDs
are not visible on the sides), take extra care not to damage the rear surface of the mirror against the chassis wall
edges.
ELECTRIC MIRROR®
425.776.4946
| |
electricmirror.com sales@electricmirror.com
ELECTRIC MIRROR®
ELECTRIC MIRROR®
|
© 2019 Electric Mirror. All rights reserved.
Hanger receiver on
chassis
|
2.0419.MC 10