Mount The Chassis - Electric Mirror Aria Installation Manual

Lighted Mirrors
Installation Guide
Installation Guide
5.

MOUNT THE CHASSIS

A. Install the mounting screws.
i. Insert a screw in the mark made earlier, leaving the screw head protruding 1/8" from the wall.
ii. Carefully raise the chassis, align the keyhole with the leveling screw, and hang the chassis on the wall.
iii. Ensure the chassis is level.
iv. Insert mounting screws in the top two corners. Multiple screw locations are offered; insert a minimum of
one screw per corner. These mounting screws are load-bearing and should be drilled into a wall stud or
suitable backing (if this isn't possible, use appropriate wall anchors).
v. Remove the keyhole screw, it will be used as a mounting screw for one of the bottom corners.
vi. Install the bottom mounting screws. The chassis mounting is now complete.
ELECTRIC MIRROR®
425.776.4946
| |
electricmirror.com sales@electricmirror.com
ELECTRIC MIRROR®
ELECTRIC MIRROR®
Insert the leveling screw first.
Next, insert screws in the top corners.
Finally, insert screws in the bottom corners.
|
© 2019 Electric Mirror. All rights reserved.
|
2.0419.MC 5