Cellink BIO X Installation And Quick Start Manual page 15

9. After a homing cycle, automatic calibration will begin and a progress screen will appear.
If necessary, press Abort to cancel the procedure at any time.
10. After the automatic calibration process is complete, a message will appear prompting
you to remove the probe. Remove the probe and select Close to return to the print
menu.
Press Start to proceed
11.
Boston, U.S. Gothenburg, Sweden
Arvid Wallgrens Backe 20,
100 Franklin St.，
Gothenburg, 41346
Boston, MA 02110
to bioprinting.
Virginia, U.S.
2000 Kraft Dr., Suite 2125
Blacksburg, VA 24060
www.cellink.com | +1 (833) CELLINK
Kyoto, Japan
46-29 Yoshida-Shimo Adachi-
cho, Sakyo-ku, Kyoto
15