Voice Text Reply (Not Compatible With Iphone); Helpful Tips And Common Questions To Improve Bluetooth Performance With Your Uconnect System - Jeep CHEROKEE 2017 User Manual

Voice Text Reply (Not Compatible With
iPhone)
NOTE:
Voice texting reply and voice texting features
require a compatible mobile device enabled
with Bluetooth Message Access Profile
(MAP). iPhone, and some other smartphones,
may not entirely support Bluetooth MAP. Visit
UconnectPhone.com for the latest system
and device compatibility.
Once your Uconnect system is paired with a
compatible mobile device, the system can
announce a new incoming text message, and
read it to you over the vehicle audio system.
You can reply to the message using Voice
Recognition by selecting, or saying, one of
the 18 pre-defined messages.
Here's How
1. Push the Uconnect Phone button
and wait for the beep, then say "reply."
Uconnect will give the following prompt:
"Please say the message you would like to
send."
2. Wait for the beep and say one of the
pre-defined messages. (If you are not
sure, you can say "help"). Uconnect will
then read the pre-defined messages
allowed.
3. As soon as you hear the message you
would like to send, you can interrupt the
list of prompts by pushing the Uconnect
phone button and saying the phrase.
Uconnect will confirm the message by
reading it back to you.
4. Push the Phone button and say "Send."
PRE-DEFINED VOICE TEXT REPLY RESPONSES
Stuck in
Yes.
traffic.
Start without
No.
me.
Where are
Okay.
you?
Are you there
Call me.
yet?
I'll call you I need
later. directions.
I'm on my
Can't talk
way.
right now.
I'm lost.
NOTE:
To make the SMS voice reading function
available, the SMS notification option on
phone must be enabled; this option is usually
available on the phone, in the Bluetooth
connections menu for a device registered as
Uconnect. After enabling this function on the
mobile phone, it must be disconnected and
reconnected with the Uconnect system in
order to make it effective.
Helpful Tips And Common Questions To
Improve Bluetooth Performance With
Your Uconnect System
See you later.
Mobile Phone won't reconnect to system after
pairing:
I'll be late.
• Set mobile phone to auto-connect or
I will be
trusted device in mobile phone Bluetooth
<5, 10,
settings (Blackberry devices).
15,...etc.>
minutes late.
• Perform a factory reset on your mobile
phone. Refer to your mobile phone manu-
See you in
facturer or cellular provider for instruc-
<5, 10,
15,...etc.> of
tions.
minutes.
Thanks.
291