Symptom
Low SQF
Incorrect installation parameters entered.
indication
SQF is between 0–29: Antenna not correctly
pointed.
SQF stuck at 30: Wrong carrier.
Indication
Chapter 3 • Pointing the antenna by using the DAPT3
Correction action
If incorrect parameters were entered, the
modem could be installed in the wrong
downlink cell. Go to Modify Installation
Parameters under Advanced Configuration
and Statistics and use the Installation
Reference Sheet to make the appropriate
corrections.
Repoint the antenna to achieve the highest
SQF value.
Choose the correct carrier on the IDU LUI.
1039429-0001 Revision D
37