Hughes Jupiter Pointing Manual page 15

The Advanced Configuration and Statistics screen appears, as shown in
Figure 5.
Figure 5: Advanced Configuration and Statistics Installation screen
6. From the Advanced Menu (in the left panel), select Installation > Install.
7. The HT1200 Terminal Installation screen shown in
8. Enter the site latitude and longitude (obtained from your GPS).
Figure 6: Input parameters
9. Select EchoStar-XVII from the drop-down menu, as shown in
10. Click Submit. The satellite modem saves the information and enters pointing
mode.
11. The Pointing Info screen appears on the installer laptop, as shown in
on page 16.
Note: If you modify any existing parameters, the modem reboots, and the
Terminal Pointing Info screen will appear following the reboot. To return to
the Input Parameters screen at any time, click Re-Install.
Chapter 2 • Pointing the antenna by using the DAPT2
Figure 6 opens.
Figure 6.
Figure 7
1039429-0001 Revision D
15