EdilKamin SCREEN EVO 80 Installation, Use And Maintenance Manual page 15

• if it is not already assembled, assemble the thermostatic valve to its plate (provided - Fig. 5 - 6).
• unroll the sensor cable
• position the assembled thermostatic valve in its compartment and route the sensor cable through the opening
in the plate (Fig. 7).
• screw the sensor mounting plate (F - Fig. 7) into the provided holes.
• fit the sensor to its bracket as shown in figure 8.
Fig. 5
the sensor
through the opening
Fig. 7
INSTALLATION
sensor cable
F
cable
Fig. 6
Fig. 8
15