Disassembly and Assambly
Removing the B027 PSBJPSE Power Supply Board
3.2.5
1. Remove thedocumentcover. (Refer to Section 3.2J2.)
2. Remove the bottom plate. (Refer to Section 3.2.4.)
3. Remove 1 CBB-tite(M4x35) screw,2CBB-tite(M3 x 10) screws, and2CBS-tite(M3 x6)
screws.
4. Disconnect the 3 cables on the board, and then remove the board.
Turn the main unit over onto
cloth so that the glass will not be damaged.
a soj?
C
s
(
M
x
)
CBB(M3X1O)
'
'
'
\
\
\
Figure
Removing the B027 PSB/PSE Board
3-6.
Rev. A