Tech Specs; Troubleshooting - Blizzard Lighting G-Mix 200 User Manual

Tech Specs!

Weight & Dimensions
Width
Depth
Height
Weight
Power
Operating Voltage
Power Consumption
Fuse
Light Source
LED
Color Temperature
Optical
Beam Angle
Gobo Size
Thermal
Max. Operating Temp.
Movement Range
Pan
Tilt
Control
Protocol
DMX Channels
Data
Other Operating Modes Standalone, Master/Slave, Auto
Warranty

Troubleshooting

Symptom
Fixture Auto-Shut Off
Beam is Dim
No Power
Blown Fuse
Slow Movement
Fixture Not Respond-
ing / Responding
Erratically
G-Mix™ 200 User Manual - Rev. C
16.4 inches (417 mm)
11.4 inches (288.6 mm)
25.5 inches (648.3 mm)
41.9 lbs. (19 kg)
100V-240VAC, 50-60Hz
334W, 2.7A, PF: .99
8A, 250V (5mm x20mm)
200W OSRAM® white LED light engine
6500K, CRI=80
5°- 42° beam angle
22.9mm outer, 20mm image, 2.2mm max thickness
104 degrees F (40 degrees C) ambient
540 degree (8-16 bit resolution)
270 degree (8-16 bit resolution)
USITT DMX-512
25/30-channel DMX Modes
3/5-pin XLR In/Out
2-year limited warranty, does not cover malfunction caused by
damage to LEDs.
Solution
Check the fan in the fixture. If it is stopped or moving slower
than normal, the unit may have shut itself off due to high heat.
This is to protect the fixture from overheating. Clear the fan of
obstructions, or return the unit for service.
Check optical system and clean excess dust/grime.
Check fuse, AC cord and circuit for malfunction.
Check AC cord and circuit for damage, verify that moving parts
are not restricted and that unit's ventilation is not obstructed
Check that speed channels are set appropriately.
Make sure all connectors are seated properly and securely.
Use Only DMX Cables.
Install a Terminator.
Check all cables for defects.
Reset fixture(s).
Page 18
(c) 2019 Blizzard Lighting, LLC