Digital Equipment VAX 4000 Model 100 Operator Instructions Manual page 130

Tape/activity LED
location on TLZ06, 2–16
use with TLZ06, 2–16
Terminal settings, 1–5
Terminator
connecting the SCSI terminator, 4–7
SCSI, 4–5
SCSI terminator removal, 4–7
ThinWire Ethernet, 3–4
ThinWire Ethernet
cable, 3–4
connecting to, 3–4 to 3–7
connecting to DECconnect faceplate, 3–6
disconnecting T-connector, 3–11
removing system from, 3–11
setting network select switch for, 3–2
T-connector and terminators, 3–4
ThinWire Ethernet port
icon, 1–6
location, 1–3
use, 1–3
TLZ06, 2–16 to 2–22
accessing, 2–2
cassette tape drive, 2–16
cleaning kit, 2–31
cleaning the heads, 2–31
inserting cassette tapes, 2–19
removing cassette tapes, 2–21
tape/activity LED location, 2–16
tape/activity LED use, 2–16
unload button location, 2–16
unload button use, 2–16
write-protect LED location, 2–16
write-protect LED use, 2–16
Transceiver cable
connecting to system, 3–8
disconnecting, 3–13
TZ30, 2–3 to 2–9
accessing, 2–2
beeper, 2–5
beeper meaning, 2–5
cleaning kit, 2–31
cleaning the heads, 2–31
controls and LEDs, 2–3
inserting tape cartridges, 2–6
Index–8
TZ30 (cont'd)
LED locations, 2–4
LED meanings, 2–5
operate lever location, 2–4
operate lever use, 2–5
operation, 2–3
power-up test, 2–5
removing tape cartridges, 2–8
tape drive, 2–3
unload button location, 2–4
unload button use, 2–5
TZK10, 2–10 to 2–15
accessing, 2–2
cleaning kit, 2–31
cleaning the heads, 2–31
dual-color LED location, 2–10
dual-color LED use, 2–10
eject button location, 2–10
eject button use, 2–10
inserting QIC tapes, 2–12
QIC tape drive, 2–10
removing QIC tapes, 2–14
U
UNITNUM, C–3
setting, C–8
Unload button
location on TLZ06, 2–16
location on TZ30, 2–4
use with TLZ06, 2–16
use with TZ30, 2–5
V
Volume control
location on RRD42, 2–24
use with RRD42, 2–24
W
Write-enable
write enabling cassette tapes, B–10
write enabling QIC tapes, B–8