Resetting The Lamp Timer - Epson Home Cinema 3200 User Manual

Caution: Do not over-tighten the screws.
9. Replace the lamp cover and tighten the screw to secure it.
Note: Be sure the lamp cover is securely installed or the lamp will not come on.
Reset the lamp timer to zero to keep track of the new lamp's usage.
Parent topic:
Related references
Optional Equipment and Replacement Parts
Related tasks

Resetting the Lamp Timer

Resetting the Lamp Timer
You must reset the lamp timer after replacing the projector's lamp to clear the lamp replacement
message and to keep track of lamp usage correctly.
Note: Do not reset the lamp timer if you have not replaced the lamp to avoid inaccurate lamp usage
information.
Projector Lamp Maintenance
118