Pairing To A Garmin Virb X Or Virb Xe Action Camera; Pairing To A Third-Party Camera - Garmin GMA 245 Pilot's Manual

Hide thumbs Also See for GMA 245:

Table of Contents

GMA 245 Audio Panel

PAIRING TO A GARMIN VIRB X OR VIRB XE ACTION

CAMERA

The GMA 245 is capable of connecting to one Bluetooth device

NOTE:

at a time.

The GMA 245 supports Bluetooth wireless delivery of pilot

headphone audio to versions of the Garmin VIRB action camera that

support Bluetooth mic audio input for recording.

Pairing a Garmin VIRB to the GMA 245 works like pairing other

Bluetooth audio devices. Once connected, pilot headphone audio will

be delivered to the VIRB via Bluetooth. In a connection to the Garmin

VIRB, the GMA is the source. Therefore, selecting an entertainment key

is not required.

The third party camera must support receiving audio via the

NOTE:

Bluetooth Hands-Free Profile.

The third party camera must initiate the initial pairing process

NOTE:

with the GMA 245.

Press and hold the TEL (PAIR) Key for one second to put the GMA

245 into pairing mode. Reference the third party camera' s manual for

its pairing instructions. Once the pairing process is complete the GMA

245 and the third party camera will connect to each other via the Hands

Free Profile. During this initial connection, Bluetooth Recording Mode

will need to be enabled on the GMA 245 for the third party camera. To

enable Bluetooth Recording Mode momentarily press the TEL (PAIR)

and PILOT keys simultaneously. When this feature is enabled, the

"Bluetooth Recording Mode Enabled" message is played on the

intercom. Enabling Bluetooth Recording Mode only needs to be done

once. When the GMA 245 and the third party camera connect again in

the future Bluetooth Recording Modes will automatically be enabled.

Garmin GMA 245 Pilot's Guide

190-01879-10 Rev. F

Table of Contents