Pairing A Bluetooth Device - Garmin GMA 245 Pilot's Manual

During power up the GMA automatically reconnects to the last
connected device. This is annunciated by the Bluetooth annunciator
illuminating.
If the same Bluetooth device is used to play music and make a
phone call, the phone has priority and the music audio is suspended.
Music audio resumes when the phone call disconnects and the music
connection is re-established by the source device.

PAIRING A BLUETOOTH DEVICE

The Bluetooth annunciation is illuminated only when a Bluetooth
NOTE:
device is connected.
Pairing mode allows a new device to discover and create a connection
to the GMA 245. Additionally, pairing mode is used to forcefully
disconnect a device currently connected to the GMA 245.
Press and hold the TEL (PAIR) Key for one second to enter pairing
mode. The Bluetooth annunciator flashes to indicate the GMA 245 is in
pairing mode and "Pairing Enabled" audio is played. Once the Bluetooth
annunciator flashes, the GMA is discoverable for two minutes, or until a
device is paired or connected. While discoverable, a Bluetooth enabled
device (e.g., cellphone or tablet) can find and pair with the GMA. Refer
to the device' s instruction manual for information on how to pair and
connect to a new Bluetooth device. Once paired and connected, the
Bluetooth annunciator on the GMA stops flashing and remains lit as
long as the Bluetooth connection is active. The GMA remembers the
last 10 paired devices. When the paired devices list is full and a new
device is paired, the least recently connected device is removed from
the paired device list.
190-01879-10 Rev. F Garmin GMA 245 Pilot's Guide
GMA 245 Audio Panel
23