Using Click-On Attachments; Removing Or Attaching Click-On Attachments - Philips S6630 Manual

Using click-on attachments

Removing or attaching click-on attachments

5 Move the shaving heads over your skin in
circular movements to catch all hairs growing in
different directions. Make sure each shaving
head is fully in contact with the skin. Exert
gentle pressure for a close, comfortable shave.
Note: Do not press too hard, this can cause skin
irritation.
Note: Rinse the shaving unit regularly to ensure
that it continues to glide smoothly over your
skin.
6 Switch off and clean the shaver after each use
(see 'Cleaning and maintenance').
7 Dry your face.
Note: Make sure that you rinse all foam or shaving
gel off the shaver.
Shaving with guard mode
1 Switch on the shaver.
2 Press the guard button once if you want to
shave at a lower, more gentle speed.
3 Move the shaving heads over your skin in
circular movements to catch all hairs growing in
different directions. Make sure each shaving
head is fully in contact with the skin. Exert
gentle pressure for a close, comfortable shave.
4 Switch off the guard mode by pressing the
guard button once.
Note: The shaver automatically starts operating
at normal speed when you switch it on again.
1 Make sure the shaver is switched off.
15
English