Philips S6630 Manual page 20

20
English
5 Remove the shaving heads from the shaving
head holder. Each shaving head consists of a
cutter and guard.
Note: Do not clean more than one cutter and
guard at a time, since they are all matching sets.
If you accidentally put a cutter in the wrong
shaving guard, it may take several weeks before
optimal shaving performance is restored.
6 Clean the cutter and guard under the tap.
7 Put the cutter back into the guard.
8 Place the shaving heads in the shaving head
holder.
Note: Make sure that the projections of the
shaving heads fit exactly into the recesses of
the shaving head holder.
9 Place the retaining rings back onto the shaving
head holder and turn them clockwise ('click').