Reaim HPI-1100 Instruction Manual
  1. Manuals
  2. Brands
  3. Reaim Manuals
  4. Pressure Washer
  5. HPI-1100
  6. Instruction manual

Reaim HPI-1100 Instruction Manual

Electric pressure washer
Hide thumbs
Table of Contents

Advertisement

Quick Links

ELECTRIC PRESSURE WASHER
INSTRUCTION MANUAL
HPI-1100
WARNING: Do not use the appliance without reading the instruction manual.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the HPI-1100 and is the answer not in the manual?

Questions and answers

Related Manuals for Reaim HPI-1100

Summary of Contents for Reaim HPI-1100

  • Page 1 ELECTRIC PRESSURE WASHER INSTRUCTION MANUAL HPI-1100 WARNING: Do not use the appliance without reading the instruction manual.

  • Page 2: Table Of Contents

    2. TECHNICAL DATA CONTENT Chapter Page Motor Brush 1. Application Max. pressure 1200PSI 2. Technical data Max. flow 1.35GPM 3. Product overview Current 4. Safety symbols on the device Voltage 120V/60 Hz and/or in the instructions Max. water 5. General safety instructions 40°C temperature 6.

  • Page 3: Safety Symbols On The Device And/Or In The Instructions

    pull out the plug from the socket 4. SAFETY SYMBOLS ON THE DEVICE (pull on the plug, not the cable) if AND/OR IN THE INSTRUCTIONS the appliance is not being used and remove the attached accessories.  Do not operate the machine without Caution! Please read the supervision.

  • Page 4: Operation Instructions

     Never leave the device unattended spray gun and the jet pipe as tightly as possible. as long as the main switch is turned If required, you should wear appropriate protective clothing as  During work breaks the manual spray protection against spray.
  • Page 5 Caution: Make sure the lance (9) is Start/stop of the machine properly fixed to the gun (7). 3. Attach the nozzles (10-15). The trigger gun (7) and lance (9) is Caution: When attaching the nozzle affected by a thrust during operation - (10-15) the button (A) on the nozzle therefore always hold it firmly with (10-15) should come out again.
  • Page 6 start again when you re-activate the Angle Nozzle (optional) trigger gun (7). The angle nozzle (13) can be used for many applications e.g. cleaning the Adjustable Nozzle underbody of a car, underneath a lawn The pressure can be adjusted by turning mower without being splashed back the adjustable nozzle (10).

  • Page 7: Connection Requirements

    9. INSTRUCTIONS FOR USE 9.1 Use  The device is intended for private use only.  Clean machines, vehicles, buildings, tools, facades, terraces, garden tools etc. with the high-pressure water jet. If necessary you can use detergents. Please use detergents sparingly, noting the quantities recommended by the producer.

  • Page 8: After Use Instructions

    the high-pressure connection no always be emptied of water prior to longer contains any bubbles. storing as follows: 1. Stop the machine (press the  Switch off the machine at the main start/stop switch (4) “O” and detach switch(4) and screw the water hose, high pressure hose (6) and high-pressure hose (6) back on.
  • Page 9 11.1 Cleaning of inlet filter Clean the water inlet filter regularly once a month or more frequently according to use. Carefully loosen the filter with a screwdriver and clean it. Check that it is intact before re-mounting it. The inlet filter must always be fitted inside the water inlet pipe to filter out sand, limestone and other impurities, as they will damage the pump valves.

  • Page 10: Trouble Shooting 9

    TROUBLE SHOOTING Symptom Cause Recommended action Machine not plugged in Plug in machine. Machine refuses to Defective socket Try another socket. start Fuse has blown Replace fuse. Switch off other machines. Defective extension cable Try without the extension cable. Check that hoses and connections are Pump is sucking air airtight.

  • Page 11: Weee - Waste Of Electric And Electronic Equipment

    WEEE - WASTE OF ELECTRIC AND ELECTRONIC EQUIPMENT The symbol on the product or on its packing indicates that this product may not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment.
  • Page 12  Any transportation costs shall always be borne by the customer, unless agreed otherwise in writing.  You can always obtain more information by the email realminfo@yahoo.com or at the number 888-899-1688. Zhejiang Xinchang Bigyao Power Tool Co., Ltd Head Office: Mengjiatang Industrial Zone, Xinchang County, Zhejiang Province, China USA Office: 101 wales avenue,Avon,MA 02322,United States...

Table of Contents