General Introduction - Reolink Argus 2 Quick Start Manual

General Introduction

Micro SD Card Slot
Reset Hole
Press the Reset Hole with a Pin to
restore factory settings
Daylight Sensor
Lens
Status LED
Built-in Mic
Built-in PIR Motion Sensor
Speaker
Wall Mount
Only for Argus 2
The LED in Red (WiFi connection failed)
The LED in Blue (WiFi connection succeeded)
Blinking: Standby status；
Blinking: Standby status
On: Working status
On: Working status
2 English
Install the Rechargeable Battery to the Camera
• Please press the button (on the top of the back casing), and slide the back casing downward
!
to close it. The button also needs to be closed firmly for good weatherproof performance.
• For the weatherproof performance, always cover the USB charging port with the rubber plug.
English 3