Roland Aproll MDX-540S User Manual page 72

4-4 Starting Cutting (NC-code Mode)




70
Chapter 4 Getting Ready for and Performing Cutting
In VPanel, click the [Cut] icon.
Click the [New File] button and open
the output file.
Alternatively, drag the output file to
[Output File List].
Output File List
This displays a list of registered output files.
When two or more output files are present, they
are executed sequentially, one after another.
Preview
This displays the contents of the output file.
[New File] button
Clicking this displays a window for selecting
the output file.
Close the spindle cover.
WARNING: This procedure
makes the machine operate. Before
you perform this procedure, check
to make sure that operation of the
machine will not create any hazard
or danger.
Click [Output].