Mounting Material; Technical Data - Hornbach 6145059 Installation And User Manual

Mounting material

A fully extracted awning has to withstand extreme
loads at its fastenings. Depending on the wall type
at the installation site, the correct fastening must be
selected in order to ensure a secure fixation.
A specialist should be consulted in order to figure out,
which fastening is the appropriate one. He will also
be able to inform about the wind resistance class the
awning can withstand after the installation.

Technical data

MODEL 6145059
Max. width 3,000 mm
Max. extension 1,600 mm
Weight fabric 200 g/m²
Weight complete 10.2 kg
To meet the wind resistance class mentioned in
the declaration of conformity, the installed awn-
ing needs to fulfil these requirements:
•
The awning is installed with the recommended
type and number of brackets.
•
The awning is installed under consideration of
the given fastening pull-out forces.
•
The instructions of the fastening manufacturer
have been respected during installation.
The combination of wall type and mounting mate-
rial used at your installation site might result in a
lower wind resistance class for your awning.
6145080 5904499
2,500 mm 2,500 mm
1,600 mm 1,600 mm
200 g/m² 200 g/m²
9.3 kg 9.3 kg
WARNING
6145081
3,000 mm
1,600 mm
200 g/m²
10.2 kg
ENGLISH | 103