Honeywell EchoView User Manual page 5

This Manual must be carefully read by all individuals who have or will have the responsibility of using, maintaining,
or servicing this product. The product will perform as designed only if it is used, maintained, and serviced in
accordance with the manufacturer's instructions. The user should understand how to set the correct parameters and
interpret the obtained results.
For safety reasons, this equipment must be operated and serviced by qualified personnel only. Read and
understand the user manual completely before operating or servicing.
Pour des raisons de sécurité, cet équipment doit être utilisé, entretenu et réparé uniquement par un personnel
qualifié. Étudier le manuel d'instructions en entier avant d'utiliser, d'entretenir ou de réparer l'équipement.
Read Before Operating
This manual must be carefully read by all individuals who have or will have the responsibility of using, maintaining,
or servicing this product. The product will perform as designed only if it is used, maintained, and serviced in
accordance with the manufacturer's instructions. The user should understand how to set the correct parameters and
interpret the obtained results.
To reduce the risk of electric shock, turn the power off before opening this instrument or performing service. Never operate
the instrument when the instrument is open. Service this product only in an area known to be non-hazardous.
Use only the Lithium battery or external rechargeable battery provided by Honeywell RAE Systems. This instrument
has not been tested in an explosive gas/air atmosphere having an oxygen concentration greater than 21%.
Substitution of components may impair suitability for intrinsic safety. Replace batteries only in non-hazardous
locations.
STATIC HAZARD: Clean only with a damp cloth.
For safety reasons this equipment must be operated and serviced by qualified personnel only. Read and
understand instruction manual completely before operating or servicing. Any rapid up-scale reading followed by a
declining or erratic reading may indicate a gas concentration beyond upper scale limit, which may be hazardous.
Intrinsically Safe Marking
Cl. I, Div. 1, Gr A, B, C, D T4
Ta = -40° C to +50° C
IECEx SIR 18.0066X
Sira 18ATEX2251X
II Ex ia IIC T4 Ga
IM1 Ex ia I Ma
2460
Ui = 3.6V, Ci=78µF, Li/Ri=3.5µH/ohm
Substitution of components may impair suitability for intrinsic safety. Replace batteries only in non-hazardous
locations.
EchoView User's Guide
WARNINGS
AVERTISSEMENT
CAUTION!
WARNING!
WARNING!
5