Honeywell EchoView User Manual page 41

The EchoView is permanently mounted to a solid surface by first securing it in its steel enclosure (a
screw through the back mates with the EchoView) and then securing the enclosure to a solid
surface such as a wall or the metal mounting plate that holds both the EchoView and the RAE
PowerPak.
Front, side, and rear views of the steel enclosure show how the EchoView is secured for
mounting.
With the EchoView securely in its housing, you can remove the cover over the battery compartment
so that you can place the connector from the RAE PowerPak into the EchoView. Use the
maintenance tool as shown.
EchoView User's Guide
41
Screw in rear
of enclosure mates
to rear of
EchoView
Maintenance tool
(P/N 019-2044-000)