To Set Cruising Speed; To Change Speed Temporarily - MARUTI SUZUKI Vitara Brezza Manual

To Set Cruising Speed

1) Turn on the cruise control system by
pushing the "CRUISE" switch (1). When
the "CRUISE" indicator light comes on,
you can set cruising speed.
2) Accelerate or decelerate to the desired
speed.
3) Push the "SET –" switch (4) and turn on
the "SET" indicator light. Take your foot
off the accelerator pedal and the set
speed will be maintained.
WARNING
If the cruising speed is set by acci-
dentally set, you cannot decelerate or
could loose control of the vehicle.
This could lead to an accident, result-
ing in severe injury or death.
Turn off the cruise control system
and make sure the "CRUISE" indica-
tor light is off when the system is not
in use.
"CRUISE" Indicator Light
When you push the "CRUISE" switch, the
system is on and a "CRUISE" indicator
light on the instrument cluster comes on.
"SET" Indicator Light
When the vehicle's speed is controlled by
the cruise control system, a "SET" indica-
tor light on the instrument cluster comes
on.
OPERATING YOUR VEHICLE

To Change Speed Temporarily

When the cruising speed is maintained,
you can temporarily accelerate or deceler-
ate.
To accelerate, depress the accelerator
pedal. When you take your foot off the
pedal, your vehicle will return to the set
52D113
speed.
To decelerate, depress the brake pedal.
The set speed will be canceled and "SET"
indicator light will go off.
To resume the previously set speed, push
the "RES +" switch (3) and "SET" indicator
light will be turned ON again when vehicle
speed is above 40 km/h. The vehicle will
accelerate to and maintain the previously
set speed.
65D474
3-18
82PH0-74E