Automatic Air Conditioner Operating Instructions - MARUTI SUZUKI Vitara Brezza Manual

Table of Contents

Advertisement

System Operating Instructions
Automatic operation
(8)
(7)
82PH059
You can let the climate control system
work automatically. To set the system for
fully-automatic operation, follow the proce-
dure below.
1) Start the engine.
2) Push the "AUTO" switch (8).
3) Set the desired temperature by pushing
the temperature selector (1).
The blower speed, air intake and air flow
are controlled automatically to maintain the
set temperature. However, the air flow is
not changed to the defrost position auto-
matically.
To turn the climate control system off, push
the "OFF" switch (7).
NOTE:
If the "AUTO" on the display blinks, there is
a problem in the heating system and/or air
conditioning system. You should have the
system inspected by an authorised Maruti
Suzuki workshop.
NOTE:
• To find the temperature at which you are
most comfortable, start with the 25°C
(75°F) setting, for example.
• If you push the temperature selector (1)
until "HI" or "LO" appears on the display,
the climate control system will operate at
maximum heating or cooling.
• To avoid blowing cold air in cold weather
or hot air in hot weather, the system will
delay turning on the blower until warmed
or chilled air is available.
• If your vehicle has been left in the sun
with the windows closed, it will cool
faster if you open the windows briefly.
• Even under automatic operation, you
can set individual selectors to the man-
ual mode. The manually selected func-
tions are maintained, and the other
functions remain under automatic opera-
tion.
• If the windshield and/or the front door
windows are fogged, push the defrost
switch (5) to turn on the defroster, or
push the "MODE" switch (4) to change
the air flow to the heat & defrost position
(f) to defog the windows.
OTHER CONTROLS AND EQUIPMENT
• To return the blower speed selector (2),
air intake selector (3), and "MODE"
switch (4) to automatic operation, push
the "AUTO" switch (8).
EXAMPLE
(11)
(10)
Be careful not to cover the interior tem-
perature sensor (10) located between the
steering wheel and the climate control
panel, or the solar sensor (11) located at
the top of the central part of the dash-
board. These sensors are used by the
automatic system to regulate temperature.
64MS149
5-30
82PH0-74E

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Vitara Brezza and is the answer not in the manual?

Table of Contents

Save PDF