Fellow Kogyo FOCAS-2000 Instruction Manual page 31

Maintenance and Checking
8
.
Oil alarm point (Alarm Setting) record display screen
8-3-3.
Here we'll explain display screens on which you can check oil alarm point set values.
Display of a group item
Code No.
Detailed display of
Alarm Setting
Page 1
Detailed display of
Alarm Setting
Page 2
Valve state
xx: OFF = Close / ON = Open
Detailed display of
Alarm Setting
Page 3
Hours : Minutes : Seconds
Year / Month / Day
Written data
Code No.
Year / Month / Day
Content of oil alarm point record
Code No.
Year / Month / Day
Fresh water valve state
xx: OFF = Close / ON = Open
Code No. Year / Month / Day
Alarm1 setting state Alarm2 setting state
xx: Value of oil alarm point 1 xx: Value of oil alarm point 1
Location of displayed data /
Total number of data elements written
Press "Enter." Page 1 of details is displayed.
Hours : Minutes : Seconds
Press "Enter." Page 2 of Alarm Setting (Details) is displayed.
Hours : Minutes : Seconds
Pressure switch state
xx: OFF = No pressure / ON = Pressure
Sample water valve state
xx: OFF = Close / ON = Open
Press "Enter." Page 3 of Alarm Setting (Details) is displayed.
Hours : Minutes : Seconds
Press "Enter." "All Status" group item is displayed back.
Press "Esc" to end viewing.
This display example explains how to view
the Alarm1 Setting operational log from the
"All Status" group item.
The left screen is displayed when "All Status"
group item is selected.
You can also view old records by pressing
" " on this screen.
This screen is displayed when the Alarm
Setting item is found on the All Status group
item screen.
(The "Alarm Setting" screen has a code [66]
on the upper right part of the screen.)
You can also view old records by pressing
" " on this screen.
On the left screen, you can confirm the states
of the three-way valve, fresh water valve,
sample water valve, and pressure switch
when "Alarm Setting" is written.
You can also view old records by pressing
" " on this screen.
On the left screen, you can confirm Alarm1
and Alarm2 oil alarm point set values.
You can also view old records by pressing
" " on this screen.
Page. 30