Fellow Kogyo FOCAS-2000 Instruction Manual page 11

Page. 10
Preparing for Operation
4
.
Set the clock right.
A warning is displayed to indicate "Set the clock."
Press "Enter."
In this state, you can set the clock.
Press "Enter" to set a year. The cursor blinks at a digit you can enter a value.
Press " " to select a value. Press "Enter" after selecting a value.
Press " ." The cursor moves to a month entry digit.
Press "Enter" to set a month. The cursor blinks at a digit you can enter a value.
Press " " to select a value. Press "Enter" after selecting a value.
Repeat the above to set hours, minutes, and seconds.
Set seconds after setting minutes.
Press " ." The cursor moves to a second entry digit.
Press "Enter" to set seconds. The cursor blinks at a digit you can enter a value.
Press " " to select a value. Press "Enter" after selecting a value.
Press " ." The cursor moves to the "ENT" position.
Press "Enter."
"Standby" and the current time are displayed on the screen.
Check and make sure the "seconds" value of the clock is changing.
With this, the preparation for operation (initial setting) is completed.