Installation Site Choosing; Outdoor Unit Mounting Dimension - Carrier 42QSS009DS Installation Manual

3. OUTDOOR UNIT INSTALLATION

3.1 INSTALLATION SITE CHOOSING

OUTDOOR UNIT
■ Where it is out of rain or direct sunlight.
■ Where it is well-ventilated and free from obstacles near the air inlet and air outlet.
■ Where does not increase the operating noise or vibration of the outdoor unit.
■ Where does not cause any drainage problem with discharged water.
■ Install the outdoor unit properly at a place that is durable enough to the weight of the outdoor unit.
■ Where provides appropriate clearances as outlined
■ Where the piping between the indoor and outdoor units is within the allowable limits.
■ In regions with snowfall and cold temperatures, avoid installing the outdoor unit in areas where it can
be covered by snow. If heavy snow is expected, a field supplied ice or stand and field supplied-installed
wind baffle should be installed to protect the unit from snow accumulation and blocked air intake.
■ When installing the outdoor unit in a place that is
constantly exposed to a strong wind, it is recommended
that a wind baffle be used.

3.2 OUTDOOR UNIT MOUNTING DIMENSION

W
D
Model
W
(38QUS)
800
009~018
845
024
945
030/036
952
048/060
GB-13 7
B
Outline dimension
H D A
B
554 333 340 514
702 363 350 540
810 420 403 673
1333 415 404 634
H
A
W
H