Table of Contents
Advertisement
Check
Possible remedy
I
Are you tryingto feed paper
using the ffont panel buttons
while the ON LINE indicator
is illuminated?
You can only feed paperin this way when theprinteris
off-line. Set the printeroff-line andthen feed paper.
Is the paper
too
thick?
Thereprelimits to thethicknessofpaperthatcanbe fed
'1
in this
way (one top copy and two
NCRcopies). Try
usingthinnerpaper.
If the ASF is not operatingor is not feeding paper correctly, check the
following:
Check
Possibleremedy
Has the ASF option been
Selectthisoption.
selected with the DIP
switch?
he release lever set to the
I
The
release lever should be set to the single-sheet
uosition?
position.
1s- the
ASF
correctly
mounted?
Is paper caught up neiw the
printhead?
Are the left andright guides
too close together?
MakesurethattheASFisproperly seatedontheprinter.
Stopprinting,remove thejarnmedsheet (you mayhave
to remove the ASF for this), andcontinue.
If the left and right gui&s are too close together, the
paperwill not feed smoothly.Move thema little further
atmrtto allow the Dawr to feed ffeelv.
Is theretoo muchpaperin the
The ASF'Spaperfed hopperandstackercan hold 50
paperfeedhopperorstacker?
sheets each. Make surethatthereis no morepaperthan
this in either the hoooer or stacker.
Was thepaperfannedbefore
If this is not don%paperjams may occur. Remove the
being fed into the ASF?
stack of paperfrom the ASF andfan it before reinsert-
ilw.
Has the paperbeen used al-
Ordy new, uncressed paper should be used with the
ready or is it creased?
ASF.
Are you tryingto feed paper
You can only feed paperin this way when theprinteris
using the frontpanel buttons
off-line. Set the printeroff-line andthen feed paper.
while the ONLINE indicator
is illuminated?
Is the papertoo thick or too
Therearelimits to thethicknessofpaperthat cmbe fed
~in?
in this way. Tryusing differentpaper.
93
Advertisement
Table of Contents
