Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Drive DeVilbiss Med Aire FlexWave
Summary of Contents for Drive DeVilbiss Med Aire FlexWave
- Page 1 Med Aire FlexWave Alternating Pressure System Instructions for use...
-
Page 2: Table Of Contents
Maintenance, service and storage ......9 Disposal ..............9 Warranty ..............9 Troubleshooting ............10 Specifications ............10 Type label ..............11 Service life ............... 11 Drive Medical GmbH & Co. KG | Subject to error and change Instructions for use Med Aire FlexWave... -
Page 3: Preface
Scope of delivery The Med Aire FlexWave can be operated in alternating pressure mode as well as in static mode. Through an Please check the contents for damage and completeness. integrated seat function, the pressure in the cells can be If one of the parts listed below is missing, please contact adapted to a seated position. -
Page 4: Safety Instructions
• Avoid pulling, kinking and running over the power • Take the Med Aire FlexWave out of the packaging. cord. • Check the contents for completeness and any visible • If the device fuses are defective, please have the damage. -
Page 5: Explanation Of Functions
Acoustic alarm signal can be muted and remains muted until the button is pressed once again! Seat Increase in the cell pressure in a seated position Drive Medical GmbH & Co. KG | Subject to error and change Instructions for use Med Aire FlexWave... -
Page 6: Startup
Fig. 2). The "Alternating Pressure" LED indicates that the alternating pressure function is enabled. Static function The Med Aire FlexWave has a static function as a standard feature. This is switched on using the button. The "Static" LED indicates that the static function is enabled. -
Page 7: Air Flow
In the event of a power failure, set the system to transport group of air chambers is microperforated at the edge mode. See section on transport function. and in this way, it ensures that the Med Aire FlexWave is actively supplied with air. Alarm function... -
Page 8: Cleaning, Disinfection And Care
Robert Koch Institute (RKI) and/or the Association for Applied Hygiene (VAH) is necessary. Reuse/patient change In the case of reuse/patient change, the Med Aire FlexWave must be disinfected and cleaned according to a validated method recognized by the Robert Koch Institute. -
Page 9: Maintenance, Service And Storage
Drive Medical may be used. If the system develops a defect or fault, please contact a trusted specialist dealer. Med Aire FlexWave can be checked and repaired by an authorized specialist dealer or via your specialist dealer from Drive Medical. -
Page 10: Troubleshooting
36.9 x 13.5 x 25 cm Cover Nylon/PU, breathable, washable Pressure range 10- 50 mbar Cycle time 10/15/20/25 min. Max. load 20 - 200 kg Drive Medical GmbH & Co. KG | Subject to error and change Instructions for use Med Aire FlexWave... -
Page 11: Type Label
The service life may also be significantly shortened through extreme and improper use, however. Determination of the service life by our company does not represent any additional guarantee. Drive Medical GmbH & Co. KG | Subject to error and change Instructions for use Med Aire FlexWave... - Page 12 Your specialist dealer: Subject to error and change Last updated: 01.07.2019 Manufacturer: Drive Medical GmbH & Co. KG • Leutkircher Straße 44 • D-88316 Isny/Allgäu • Germany • info@drivemedical.de • www.drivemedical.de • Tel.: +49 (0) 7562 9724-0 • Fax: +49 (0) 7562 9724-25 Distributor: DeVilbiss Healthcare GmbH •...
Need help?
Do you have a question about the Med Aire FlexWave and is the answer not in the manual?
Questions and answers