Using Your Printer With Word Processors - Star Micronics NB-15 User Manual

Star micronics printer user's manual
Table of Contents

Advertisement

are now available. It has the capability of using several of the ad-
vanced features
of your printer.
Perhaps
the most often used
feature
with spreadsheet
programs
is compressed
printing.
Let's see how to use compressed
printing with SuperCalc.
In SuperCalc,
the /Output command
provides out put to the
printer. One of the options of the /Output command
is S(etup).
This option provides you with a menu of functions to configure
SuperCalc to match your printer. You can change the number of
characters that SuperCalc will print on a line and the number of
lines that will print on a page. You should be sure that these
values
match
your
printer.
Your
printer
can
print
136
characters per line of pica type, or 234 characters per line of con-
densed elite type. One of the other options on this menu is "send
setup codes to printer". This is how we tell this printer that we
want to use condensed
print. The code to switch this printer in-
to condensed
print is ASCII 15, or control-O. So to switch on
condensed
type, use the /Output command and, after selecting
D(isplay) and entering the range to print, select the S(etup) op-
tion, and the S(etup)-"Manual
setup codes" sub option. Then, at
the prompt that says "Enter codes (CR when done)", type con-
trol-0. Remember,
to enter control-0 you should hold down the
CTRL key while you press the 0 key (That's the letter Oh, not
the number zero). Then just press the return and select P(rint)
to print your report.
You only need to go through
this procedure
once each time
you use SuperCalc because your printer will stay in compressed
print until it's turned off or reset.
You might also wish to use some of your printer's
other
features with SuperCalc. Find the code for the feature you wish
to use in Appendix
C and use the same procedure
given here.
-
--
-
USING YOUR PRINTER WITH WORD PROCESSORS
Not many word processing
programs
recognize the advanced
features of printers like your printer. They usually provide for
some method of making bold characters
and underlining.
But
your printer can do much more than that. The people that write
word processing
programs
do, however, know that there are a
lot of different printers on the market, and so they usually, (but
not always) provide a way of sending special codes to a printer.
We will study one example of this to see how a typical word pro-
-.

Advertisement

Table of Contents
loading

Table of Contents