Table of Contents
Advertisement
Function
Control code
Selects font slot 1
(ESC) "k" CHR$( 1) or (ESC) "4"
Selects font slot 2
(ESC) "k" CHR$(2)
Selects internal characters
Cancels font slot 1
iESC
j
"k" CHR$(Oj
(ESC) "5"
n Underlines
and overlines
Not only your printer print all characters in both draft and LQ,
but it can underline or overline them too. The control codes are
shown in Table 5-3.
60 LPRINT "This
line
shows Font
2 characters."
70 LPRINT CHR$(27);"k";CHR$(O);
80 LPRINT "This
line
shows Internal
Characters."
90 END
When you've installed the Gothic Font Cartridge to the font
slot 1, and the Italic Prestige
Font Cartridge to the font slot 2,
the results of this program look like this:
This
line
shows
Font
1
characters.
This line shows
Font 2 characters.
This
line
shows
Internal
Characters.
In this program, line 30 selects the characters
on the font slot
1, with (ESC) "k" CHR$(l) command.
Line 40 prints a sample
with the LQ characters in the font cartridge installed on the font
slot 1. Line 50 selects the font cartridge slot 2 with (ESC) "k"
CHR$(2) command.
Line 60 prints a sample with the font slot 2
characters
before line 70 switches printer back to internal LQ
characters
with an (ESC) "k" CHR$(O) command.
You can control the font styles with the extra functions with
the control panel.
Table 5-2
Font selection commands
Advertisement
Table of Contents
