Statusmessages - Star Micronics LaserPrinter4 Operation Manual

9.5 STATUSMESSAGES
.Statusmessages a~ low priority messages that either indicate normal
conditionsor providewarningsthat need not be acted upon immediately.
These conditionsshouldnot occur whenthe printeris On Line. If they do,
however,the alarm will beep artdthe printer will go Off Line. For some
conditionshowever,there is the possibilityof a conditionoccurringwhen
theprinteris OnLine.If it does,thealarmwillnot soundandtheprinterwill
remain On Line.
Message Meaning
ActionlStatus
PRINTER printeris warming up but
—
WARMUP seMce call not necessary
ENGINE TEST
operatorhasinitiateda testof test in progress
theprinting
ENGINE RESET engineis beingreset
—
REINITIALIZE
controllersoftinitialization occurswhen
WSETI is
pressed or emulationis
changed;mayalsooccur
whenprinteris on lineif
emulationis changedor
resetis sentfromhost
STATUS SHEET
statussheetprintout occurs when
[TEST]is
heldforatleast3 butless
than6 seconds
FONT LIST
fontlistprintout occurs when [TEST] is
held at least 3 seconds
and pressed within one
second
CLEANING PAPER cleaningpaperprintout occurs when
[TEST]is
heldforatleast3 seconds
and pressedtwice
MP LOAD THE PAP waitingfor cleaningpaper occursafter printingthe
cleaningpaper
NOW CLEANING feedingcleaningpaper occurswhenthecleaning
paperis beingfed
CLEANING DONE
finishedcleaning occurs after cleaning;
remaining for one sec-
ond
89