Cleaning Thefixingassembly - Star Micronics LaserPrinter4 Operation Manual

Star micronics laser printer operations manual
Table of Contents

Advertisement

I
.
Do not stem the cartridgewhereit will be exposedto directsunlight.
Storethecartridgewiththelablefacingup. Donotturnit upsidedownor
sttid it on end.
Stem the cartridgeat a temperate of betweenO"Cand 35°C(32°Fand
95"F).
Do not storethe cartridgein saltyair, or wherethere are corrosivegases
such as ammonia.
Keep the cartridgeaway from CRTs,disk drivesand floppydisks.The
magnetin the cartridgecan adverselyaffectthem.
Alwayskeep the cartridgeaway from children.
Be sure to use the cartridgebeforeits expirationdate. Otherwise,print
qualitywill be affected. -
When handling the EP-L cartridge, also pay attentionto the following
points,in additionto the above.
Do not touch the bottomof the cartridgewhenhandlingthe cartridge.
Donotopenthe drumprotectiveshutter.Ifitisopened, printqualitymay
be affected.
8.3 CLEANINGTHE FIXINGASSEMBLY
Transpanmcyfilmsmay sometimesshowstainproblemat eitherthe top or
bottom,of theftis. Thisproblemmaybe causedby a dirtypaperpathorthe
flaw on the EP-L cartridge.In this case, clean the fixing assembly,and
replace the EP-L cartridge if necessary.Regular cleaning of the fixing
assemblywill reducethe possibilityof paperjam and willprolongthe life
of the printer.The fixingassemblycan be cleanedusing cleaningpaper.
Firstprinta sheetof"CLEANINGPAPER"on letter,A4,or legalsizepaper
accordingto the followingprocedure(see "3.2.1PrintingTest Sheets").
1) Hold the [TEST] buttonuntilthe screen displays"HOLDFOR TEST"
then "STATUSSHEET".
2) Press the [TEST] button "twice" within one second after "STATUS
SHEET"is displayed.The screendisplays"CLEANINGPAPER".
76

Advertisement

Table of Contents
loading

This manual is also suitable for:

Laserprinter 4

Table of Contents