Printingin Landscapeorientation; Changingcharacterset - Star Micronics LaserPrinter4 Operation Manual

Press [v] when the required paper/envelopesize is displayed on the
screen.
"Finally,press [ON LINE], which readies the Star LaserPrinter4 for
printing.
Beforeyou stan printing,reffl the cassettewith the appropriatepaper.
4.6 PRINTINGIN LANDSCAPEORIENTATION
If you want to change from portrait to landscape orientation for your
printed page, follow this procedure, after going Off Line and pressing
[PROGRAM]:
c Press [<] until you get
LAYOUT
Press [v],
which will display
ORIENTATION
s Press [v]
for
Portrait@
Pressing [<] gives
Landscape
Pressing [v]
selectsLandscape.
4.7 CHANGINGCHARACTERSET
If you want to use a characterset other than that providedat the factory,
follow
thiS
procedure:
c After going Off Line and pressing [PROGRAM]
c
Press
[<]
until
y ou see
CHARACTER
s Press [v],
whichdisplays,in case of the HP LaserJet11Pemulation
SOURCE R (or SOURCE C or SOURCE S)@
(SOURCE R means Resident, SOURCE C for Cartridge, and
SOURCES for Soft font)
!59