Table of Contents
Advertisement
5)
Select"GraphicsPrinter(s)"and press [RETURN], which displaysthe
GraphicsPrinter(s)screen.
6) Select "HP" and press [RETURN]
to display the GraphicsPrinter(s)
screen.
7) For 1500r3(XIDPI, select''LaserJet+" a ndpress[RETURN].For75DPI,
select"LaserJet"and press [RETURN].
When you have completedthe selectionof a graphicsprinter,press
[F1O].
Your current selectionswill displayed.Make sure that the selectionsare
correct.If not, repeatthe installationprocess.
To save your selections,press [Ese] to mtum to the SelectedEquipment
screen.
1) Select"SaveChanges"andpress
[RETURN],
whichdisplaystheSaving
Changesscreen.
2)
Read messageand press [RETURN].
3) Now,
youhavesavedthe changesyoumade.Press[F9]to go to theMain
Menu,orpmss [RETURN]toleavetheinstallprogram.TheEXITscreen
will be displayed.
4) Select"YES" and press [RETURN].
SelectingDefaultSettings
After runningthe INSTALLprogram,you must selectprinterdefaults.
At theDOSprompt,typeLOTUSandpress [RETURN] to displaythe 1-2-
3 AccessSystem.Movethecursorto "l-2-3", thenpress[RETURN] to run
the 1-2-3program.Lotus may ask you to insertthe SYSTEMdisk.
At the openingscreen,pms [Uto accessthe spreadsheetmenu.Then,type
[Worksheet, IG]lobal, ID]efaultand [P]rinter. The configurationmenu
will be displayed.Now you are ready to make some selectionsaboutthe
configurationof yourStar LaserPrinter4.
1)Type [1]Interfaceandselectthenumberwhichcorrespondsthe interface
for your printer.
For parallel,type "l", and for serial,type "2" (for example).
2) Selectappropriatesettingsforautolinefeed,leftmargin,rightmargin,top
margin,bottommargin,page length,wait, setup and name.
69
Advertisement
Table of Contents
