Table of Contents
Advertisement
Only part of the image is printed.
Check
Is the proper media being
used?
Paper feeding
Paper won't feed from the paper tray or manually.
Check
Is paper feed roller dirty?
Is the paper too thick or
too thin?
Is the top cover completely
closed?
Paper jams occur frequently.
Check
Are the platen and pinch
rollers dirty?
Is the paper too thick or
too thin?
Is the top cover completely
closed?
Is the film roll properly
selected?
Are you using the wrong
size media?
Two sheets of paper are fed at the same time.
Check
Is there static electricity
built up on the media?
54
Possible remedy
Special A4 media must be either manually fed or
rework your data for A4 size.
Possible remedy
Clean the inside of the printer. See page 41 for an
explanation of the proper way to clean the inside of your
printer.
Use only the recommended paper types.
Close it tightly if it is open.
Possible remedy
Clean the inside of the printer. See page 41 for an
explanation of the proper way to clean the inside of
your printer.
Use only the recommended paper types.
Close it tightly if it is open.
Properly select the film roll which is currently
installed on the printer.
Check the media settings and the film roll settings.
Using the wrong media or the wrong film will cause
errors to occur.
Possible remedy
Fan your media before loading it into the paper tray.
For iron-on transfer sheets, always place the finishing
sheet in the paper tray and manually feed one transfer
sheet at a time.
Advertisement
Table of Contents
