Table of Contents
Advertisement
The overall print is light - continued.
Check
Are you using the correct
side?
Is the media type set
correctly?
Is the print intensity set too
low?
The overall print is dark.
Check
Is the media type set
correctly?
Is the print intensity set too
high?
Patterns appear where print density is high.
Check
Is the print intensity set too
low?
Is the print speed too high?
Color variations are too large.
Check
Are the platen and pinch
rollers dirty?
Possible remedy
Recommended coated paper will have the words
"PRINT OPPOSITE SIDE" printed in light blue
letters on the back side. The side from where you can
read the silver colored letters on the recommended
OHP film is the print side.
Check the media type settings in the Printers Setup
dialog box in Windows.
Change the Printer Setup dialog box in Windows to a
higher setting. See Chapter 3 Changing intensity for
an explanation.
Possible remedy
Check the media type settings in the Printers Setup
dialog box in Windows.
Change the Printer Setup dialog box in Windows to a
higher setting. See Chapter 3 Changing intensity for
an explanation.
Possible remedy
Change the Printer Setup dialog box in Windows to a
higher setting. See Chapter 3 Changing intensity for
an explanation.
Change the print speed.
See Chapter 3 Changing print speed for an
explanation.
Possible remedy
Clean the inside of the printer. See page 41 for an
explanation of the proper way to clean the inside of
your printer.
53
Advertisement
Table of Contents
