Setup; Attachment; Operation; Cleaning And Maintenance - EuroLite LED H20 TCL Water Effect User Manual

SETUP

Attachment

Fasten the device to a wall or ceiling with the mounting bracket. Always choose screws and plugs which are
suitable for use in your wall/ceiling and have enough holding power. Fasten the device in such way that it will
not fall down.

Operation

Connect the product to the mains via the power adapter provided. Thus, it is powered on and in standby
mode.
You're ready to go: Use the remote control to control the unit conveniently from a distance.
The auto and sound-controlled color changes can also be set with the operating button at the rear of the unit.
Simply press the button repeatedly to select the desired mode.
After the operation, unplug the power adapter to prevent unnecessary power consumption. Remove the
battery from the remote control as a precaution if the product is not used for a longer period of time.

CLEANING AND MAINTENANCE

We recommend a frequent cleaning of the device. Please use a soft lint-free and moistened cloth. Never use
alcohol or solvents!
There are no serviceable parts inside the device. Maintenance and service operations are only to be carried
out by authorized dealers.
Should you need any spare parts, please use genuine parts.
If the power supply cable of this device becomes damaged, it has to be replaced by authorized dealers only
in order to avoid hazards.
Should you have further questions, please contact your dealer.

TECHNICAL SPECIFICATIONS

Power supply:
Power consumption:
LED type:
Dimensions (LxWxH):
Weight:
Please note: All information is subject to change without prior notice. 13.07.2017 ©
DANGER TO LIFE!
Disconnect from mains before starting maintenance operation!
100-240 V AC, 50/60 Hz via included charger (5 V DC, 1 A)
5 W
1 x RGB (3in1)
125 x 123 x 105 mm
0.3 kg
10/12 00110036.DOCX, Version 1.0