Specifications - Fluke 279 FC Calibration Manual

279 FC
Calibration Manual

Specifications

Maximum Voltage between any
Terminal and Earth Ground..................................1000 V
Temperature
Operating ............................................................-10 °C to +50 °C
Storage (without battery) .....................................-20 °C to +60 °C
Display (LCD)
Size .....................................................................8.9 cm (3.5 in.) diagonal
Update rate .........................................................4/sec
Volts, amps, ohms...............................................6000 counts
Frequency ...........................................................10 000 counts
Capacitance ........................................................1000 counts
Battery (BP500)......................................................Li-ion 7.4 V, 3000 mAh, customer-replaceable
Discharge ............................................................-10 °C to +50 °C
Charge ................................................................0 °C to +40 °C
Storage................................................................-20 °C to +35 °C
Battery Life.............................................................10 hours minimum
Relative Humidity ..................................................0 % to 90 % (0 °C to 35 °C)
Battery Power Supply ...........................................Input 100-240 Vac (±) 10 %, 50/60 Hz. Output 15 Vdc, 2 A.
Altitude
Operating ............................................................2000 m
Storage................................................................12 000 m
Temperature Coefficient .......................................0.1 X (specified accuracy) /°C (<18 °C or >28 °C)
Size (HxWxL)..........................................................5.7 cm x 9.4 cm x 21.6 cm (2.3 in x 3.7 in x 8.5 in)
Weight ....................................................................0.80 kg (1.75 lb)
Safety
General ...............................................................IEC 61010-1: Pollution Degree 2
Measurement ......................................................IEC61010-2-032: CAT IV 600 V / CAT III 1000 V
Li-ion Battery .......................................................IEC 62133
Electromagnetic Compatibility (EMC)
International ........................................................IEC 61326-1: Portable Electromagnetic Environment
Korea (KCC)........................................................Class A Equipment (Industrial Broadcasting & Communication Equipment)
Wireless Radio with Adapter
Frequency Range................................................2402 MHz to 2480 MHz
Output Power ......................................................<10 mW
4
0 % to 75 % (35 °C to 40 °C)
0 % to 45 % (40 °C to 50 °C)
IEC61010-2-033: CAT IV 600 V / CAT III 1000 V
CISPR 11: Group 1, Class A, IEC 61326-2-2
Group 1: Equipment has intentionally generated and/or uses conductively-coupled
radio frequency energy that is necessary for the internal function of the equipment
itself.
Class A: Equipment is suitable for use in all establishments other than domestic and
those directly connected to a low-voltage power supply network that supplies
buildings used for domestic purposes. There may be potential difficulties in ensuring
electromagnetic compatibility in other environments due to conducted and radiated
disturbances.
Emissions that exceed the levels required by CISPR 11 can occur when the
equipment is connected to a test object.
Class A: Equipment meets requirements for industrial electromagnetic wave
equipment and the seller or user should take notice of it. This equipment is intended
for use in business environments and not to be used in homes.