Table of Contents
Advertisement
Symbols
The symbols in Table 1 are used on the Product or in this manual.
Symbol
W
WARNING. RISK OF DANGER.
Consult user documentation.
X
WARNING. HAZARDOUS VOLTAGE. Risk of electric shock.
T
Double Insulated
Battery
)
Certified by CSA Group to North American safety standards.
P
Conforms to European Union directives.
Conforms to relevant Australian EMC standards.
Ã
Conforms to relevant South Korean EMC Standards.
Measurement Category II is applicable to test and measuring circuits connected directly to utilization points
(socket outlets and similar points) of the low-voltage MAINS installation.
Measurement Category III is applicable to test and measuring circuits connected to the distribution part of the
building's low-voltage MAINS installation.
Measurement Category IV is applicable to test and measuring circuits connected at the source of the
building's low-voltage MAINS installation.
This product contains a Lithium-ion battery. Do not mix with the solid waste stream. Spent batteries should be
disposed of by a qualified recycler or hazardous materials handler per local regulations. Contact your
authorized Fluke Service Center for recycling information.
This product complies with the WEEE Directive marking requirements. The affixed label indicates that you
must not discard this electrical/electronic product in domestic household waste. Product Category: With
~
reference to the equipment types in the WEEE Directive Annex I, this product is classed as category 9
"Monitoring and Control Instrumentation" product. Do not dispose of this product as unsorted municipal
waste.
Hazardous Voltage
The hazardous voltage warning X shows on the display when the Multimeter detects a voltage ≥30 V.
Test Lead Alert
The display shows LEAD for 1 second when you turn the control knob to or from the
check that the correct accessory is connected.
Display OL
If the measurement value (does not include temperature measurements) is over the limit, or outside the
measurement range, the Multimeter shows OL in the display.
Table 1. Symbols
Meaning
True-rms Thermal Multimeter
Safety Information
position. This is a reminder to
3
Hide quick links:
Advertisement
Table of Contents
