Troubleshooting - Teka CLC User Manual

TROUBLESHOOTING

Below is a list of some of the possible malfunctions.
If the problem cannot be resolved as described, contact Customer Services.
PROBLEM
The coffee is not hot.
The coffee is not creamy
enough.
The coffee is delivered too
slowly or a drop at a time.
POSSIBLE CAUSE
• The cups were not pre-
heated.
• The infuser has cooled
down because 2/3 minutes
have elapsed since the last
coffee was made.
• The coffee is ground too
coarsely.
• Wrong type of coffee
• The coffee is ground too
finely.
22
REMEDY
• Warm the cups by rinsing
them with hot water.
• Before making coffee, heat
the infuser by pressing the
button (B8) (fig. 12).
• Turn the grinding adjust-
ment knob one click anti-
clockwise towards "1" while
the coffee mill is in opera-
tion (fig. 11).
• Use a type of coffee for es-
presso coffee makers.
• Turn the grinding adjust-
ment knob one click anti-
clockwise towards "7" while
the coffee mill is in opera-
tion (fig. 11).
Continue one click at a time
until coffee delivery is satis-
factory.
The effect is only visible
after delivering two coffees.