Changing Coffee Temperature - Teka CLC User Manual

• Make sure the appliance is ready and the
water softener filter has been removed.
• Press the MENU button (B6) then press the
NEXT button (B7) repeatedly until the ap-
pliance displays "DESCALE NO".
• Press the CHANGE button (B8) and the ap-
pliance displays "DESCALE YES".
• Press the OK button (B9) to start the descale
programme. The appliance displays "ADD
DESCALER PRESS OK".
• Empty the water tank, pour the contents of
the descaler bottle into the tank respecting
the instructions given on the descaler pack,
then add water.
When descaling subsequently, use desca-
ler of the same type and brand as supplied
(available from the manufacturer's autho-
rised Customer Services) or a descaler re-
commended by Customer Services. Always
follow the instructions on the pack.
• Attach the cappuccino maker to the nozzle.
• Place a container with a minimum capacity
of 2 litres under the cappuccino maker (fig.
3).
• Press the OK button. Descaler flows out of
the cappuccino maker into the container
below. "APPLIANCE IN DESCALE" is di-
splayed.
• The descale programme automatically per-
forms a series of deliveries and pauses to
remove limescale deposits from inside the
machine.
• After about 30 minutes, the appliance di-
splays "RINSING FILL TANK".
The appliance must now be rinsed through
to eliminate residues of descaling solution
from inside the appliance. Proceed as fol-
lows:
• Empty the water tank, rinse and fill with
clean water.
• Replace the tank;
• Empty the full container and put back under
the cappuccino maker.
• Press the OK button. Hot water flows out of
the cappuccino maker spout into the contai-
ner below and the appliance displays "RIN-
SING".
• When the water tank is empty, the appliance
displays the message "RINSING COMPLETE
PRESS OK".
• Press the OK button and refill the water tank
with clean water.
• The descale programme is now terminated
and the appliance is ready to make coffee
again.
NOTE: If descaling is interrupted before
completion, the machine still displays the
descaling message and the process must be
begun again from the beginning.
Empty the water tank, rinse with clean water
and deliver a cup of hot water.
Important! FAILURE TO DESCALE THE
APPLIANCE REGULARLY INVALIDATES THE
GUARANTEE.

Changing coffee temperature

To change coffee temperature, proceed as fol-
lows:
• Press the MENU button (B6), then press the
NEXT button (B7) repeatedly until the ap-
pliance displays "TEMPERATURE MEDIUM".
• Press the CHANGE button (B8) until the ap-
pliance displays the required coffee tempera-
ture.
• Press the OK button (B9) to confirm.
• Press the MENU button to exit programming
mode or NEXT to change other parameters.
Changing the length of time the
appliance remains on
The appliance is set by default to go off automa-
tically 30 minutes after the last coffee has been
made. To change this interval (max. 180 min),
proceed as follows:
• Press the MENU button (B6) then press the
NEXT button (B7) repeatedly until the ap-
pliance displays: "OFF AFTER 30 MIN".
• Press the CHANGE button (B8) to change the
number of time the appliance remains on.
• Press the OK button (B9) to confirm.
• Press the MENU button to exit programming
mode or NEXT to change other parameters.
17