Change Password Commands - Select Engineered Systems SG2CL User Programming Manual

Select Engineered Systems - Cellular Select Gate Programming Guide

2.1.2 Change Password Commands

Change Password Commands
All commands define the existing programming password as "PPPP". Wherever
"PPPP" occurs, substitute your own programming password e.g. the examples use
factory default "1234".
Command Name
1
Change
Programming
Password
1
Change
Access
Password
1
Change Intercom
Password
1
Changing Passwords
When making changes to password using one of the above instructions, the user should
not attempt to use the new password until the OK response is received from the
Cellular Select Gate, otherwise the Cellular Select Gate will return an error for
commands containing the new password.
Command Text
*12*PPPP#01NNNN#
PPPP= Existing 4-digit programming password
01 = Command for Change Programming
Password
NNNN = New Programming Password (4 digits,
0-9)
Example: Change Programming password to
4239:
Full Text = *12*1234#014239#
*12*PPPP02AAAA#
PPPP= Existing 4-digit programming password
02 = Command for Change Access Password
AAAA = New Access Password (4 digits, 0-9)
Example: Change Access password to 7865:
Full Text = *12*1234#027865#
*12*PPPP#03IIII#
PPPP= Existing 4-digit programming password
03 = Command for Change Intercom Password
IIII = New Intercom Password (4 digits, 0-9)
Example: Change the Intercom Password to
5523:
Full Text = *12*1234#035523#
Page 8 of 30
2019_03_D
Text (SMS)
Response
Accepted:
"OK"
Not
Accepted:
Error response
(see Sec. 2.10,
Fig 8)
Accepted:
"OK"
Not
Accepted:
Error response
(see Sec. 2.10,
Fig 8)
Accepted:
"OK"
Not
Accepted:
Error response
(see Sec. 2.10,
Fig 8)