Command Passwords; Default Passwords - Select Engineered Systems SG2CL User Programming Manual

Select Engineered Systems - Cellular Select Gate Programming Guide

2.1 Command Passwords

Text (SMS) commands for the Cellular Select Gate are divided into three different functional groups, each
having its own 4-digit password:
 The Programming Password is used when programming the unit
 The Access Password is used when sending a text message to gain entry to the property
 The Intercom Password is only used during voice communications with the unit when a user calls the
CSG from his/her touch-tone phone. Entering the Intercom password allows the caller to enter into a two
way conversation with the person at the CSG and also allows the caller to open a gate by pressing a
keypad number using a touch on their cell phone.

2.1.1 Default Passwords

The table below shows the default factory passwords for the Cellular Select Gates when shipped:
Default Cellular Select Gate Passwords
Text (SMS) Functional Group Factory Password
Access
Programming
Intercom
NOTE – Please Change Passwords From Their Default Settings
It is highly recommended that you change the passwords from the default passwords.
The default passwords are universally known and if left unchanged anyone can
program your unit for their own purposes.
NOTE – Please Keep Records of Password Changes
It is highly recommended that you record any password changes you make. Once
changed, the factory CANNOT recover old passwords. Instead, a full reset would
be required, which will also delete all phone, card and pin numbers and other user data.
5678
1234
1212
Page 7 of 30
2019_03_D